The SMIGHT Grid2
complete solution at a glance
Measure
![](https://smight.com/wp-content/uploads/Sensor.png)
Sensor technology
Interpret
![](https://smight.com/wp-content/uploads/cockpit.png)
SMIGHT IQ Cockpit
Act
![](https://smight.com/wp-content/uploads/copilot.png)
SMIGHT IQ Copilot
The SMIGHT Grid2
complete solution at a glance
Measure
![](https://smight.com/wp-content/uploads/Sensor.png)
Sensor technology
Interpret
![](https://smight.com/wp-content/uploads/cockpit.png)
SMIGHT IQ Cockpit
Act
![](https://smight.com/wp-content/uploads/copilot.png)
SMIGHT IQ Copilot
SMIGHT IQ Copilot: Temporarily reducing loads based on data in accordance with Section 14a EnWG
![02-03b_Abgangsdetailseite](https://smight.com/wp-content/uploads/02-03b_Abgangsdetailseite-690x491.png)
The best kind of intervention in accordance with 14a EnWG is the intervention that does not need to be made.
If it is unavoidable, however, distribution system operators can now use SMIGHT Grid2 to record, identify and eliminate bottlenecks to the full extent using the proven sensor technology.
SMIGHT Grid2 provides the transparency needed to react before the grid reaches a critical state.
If the need to take action cannot be avoided, our SMIGHT IQ Copilot solution represents a pragmatic way of doing so – for the first time, without having to bring in a complex digital grid model and expensive software.
4 takeaways from
Section 14a EnWG
#1 Connect
Distribution system operators must immediately connect all loads covered by Section 14a EnWG.
#2 Understand
Distribution system operators must identify/understand bottlenecks and avoid them by taking preventive measures.
#3 Manage
Distribution system operators are permitted to temporarily reduce loads in the event of highly critical grid conditions under certain circumstances.
#4 Optimize
Distribution system operators must permanently eliminate bottlenecks through grid expansion.
MEASURE with SMIGHT Grid2 sensor technology
![measure](https://smight.com/wp-content/uploads/measure-690x387.png)
What you measure you don’t need to estimate. However, you don’t need to measure everything, everywhere, all at once.
What: Current, voltage, and phase angle.
Where: Only where load issues exist.
When: Deploy sensors in a steady roll-out as demand increases.
INTERPRET with the SMIGHT Grid2 Cockpit
![interpret](https://smight.com/wp-content/uploads/interpret-690x375.png)
Produce insights out of data.
Prioritise: Find out where you need to apply your limited resources.
Utilise: Identify how to fully exploit your existing assets and infrastructure.
Estimate: Use your measured data to produce more accurate estimations of what you don’t measure.
ACT with the SMIGHT IQ Copilot
![act](https://smight.com/wp-content/uploads/act-690x390.png)
Turn insights into reality.
Reinforce and develop your grid.
Deploy flexibility and load management where and when it is needed.
Connect more customers to your network.
More information in compact form
Most frequently questions
SMIGHT Grid2 brochure
Press release SMIGHT IQ Copilot
SMIGHT newsletter
Do you want added value from low-voltage data?